Convert DXF to DGN
| File Extension | DXF |
| Full Name | AutoCAD DXF Drawing Exchange Format |
The extension .dxf belongs to the files of the type drawing exchange format files. These are the files that store graphical data in a digital format and often the output formats of Computer Aided drawing tools. The file is used mostly for the vector image files that are rendered using the Autodesk Software tools.
| File Extension | DGN |
| Full Name | MicroStation Design Format |
File with a .DGN extension contains a two or three dimensional project – a drawing created with the MicroStation software developed by Bentley Systems. It can be stored in the ISFF standard (Intergraph Standard File Format) or V8 DGN (DesiGN).
What is file format conversion?
File format conversion is the process of transforming a file from one format (referred to as "DXF") to another (referred to as "DGN"). This may be necessary for various reasons. For example, DXF file may be incompatible with the software or device we want to use to open or edit it. In such cases, converting the file from format DXF to format DGN becomes essential.
So, how can we perform DXF to DGN file conversion? Fortunately, there are many tools and computer programs available that enable file format conversion. These tools work by reading the data from the file in format DXF and transforming it into format DGN. This allows the preservation of the original information contained in the file, even after changing its format. Below you will find a list of DXF to DGN converters.
Conversion from DXF to DGN
DXF to DGN
How to convert the DXF file to DGN?
If you have already downloaded one of the converters and installed it on your computer, you can proceed to the appropriate conversion process of DXF to DGN. Handling all the programs is usually very intuitive and is based on the same pattern of conduct. We will briefly discuss a few steps that you always need to go through while changing the format of the DXF file:
- Please indicate on your computer the source file DXF, the format of which you are going to change
- Load the DXF file to the application
- Select the output format of the DGN file (the one that we want to achieve)
- Select the location to save the output file DGN on the disk (the place where the program will save the converted file)
- Confirm conversion
- Wait for a moment
- Enjoy the converted DGN file that can be found in the location selected in step 4
Other conversions
from the DXF format:
- DXF to 3D
- DXF to 3DMAP
- DXF to 3DS
- DXF to AC
- DXF to AI
- DXF to ART
- DXF to ASC
- DXF to ASE
- DXF to BLEND
- DXF to CAD
- DXF to CAL
- DXF to CATDRAWING
- DXF to CATPRODUCT
- DXF to CDR
- DXF to CGM
- DXF to CGR
- DXF to CNV
- DXF to CSM
- DXF to CVX
- DXF to DFT
- DXF to DRW
- DXF to DRWDOT
- DXF to DST
- DXF to DSZ
- DXF to DTD
- DXF to DWF
- DXF to DWFX
- DXF to DWG
- DXF to EASM
- DXF to EDRW
- DXF to EMS
- DXF to EXB
- DXF to EXP
- DXF to FBX
- DXF to FCSTD
- DXF to FLT
- DXF to GBR
- DXF to GERBER
- DXF to GT
- DXF to HPG
- DXF to HPGL
- DXF to IAM
- DXF to IDW
- DXF to IFC
- DXF to IGES
- DXF to IGS
- DXF to IPN
- DXF to IPT
- DXF to KMZ
- DXF to LAY
- DXF to MODEL
- DXF to NC
- DXF to NC1
- DXF to OBJ
- DXF to ODG
- DXF to OFF
- DXF to PAR
- DXF to PCB
- DXF to PRT
- DXF to PS
- DXF to PSM
- DXF to SAT
- DXF to SCAD
- DXF to SHE
- DXF to SKP
- DXF to SLDDRW
- DXF to SLDPRT
- DXF to SLP
- DXF to STEP
- DXF to STL
- DXF to STP
- DXF to SVG
- DXF to SXE
- DXF to TAP
- DXF to VRML
- DXF to VSS
- DXF to VSSX
- DXF to VWX
- DXF to XXX
- DXF to X_T
Other conversions
to the DGN format:
I cannot see the file extensions. What should I do?
File extensions are not normally displayed to users. To change this, go to Control Panel, select Appearance and Personalization and Folder Options. Next, select the View and find the option "Hide extensions for known file types". The option should be deselected (cleared) and confirmed with OK.